Connect the Marketing 360® Card Reader with the Marketing 360® Mobile App

Connect the Marketing 360® Card Reader with the Marketing 360® Mobile App

Pair the Marketing 360®  Card Reader with the Marketing 360® Mobile App to easily and securely accept card-present transactions. 

Don’t have a Card Reader? Please contact your Marketing 360® representative, or give our Payments team a call at 855-462-3343. 

You can connect your Card Reader to the Marketing 360® Mobile App using the steps below:

  1. Turn the reader on using the power button located on the side.

    Reader_power_button_on_side_of_device.jpg

  2. The green indicator lights will light up, indicating the device is starting up. This means that the reader is ready to connect to your device.

    Reader_all_lights_on_as_device_turns_on.jpg
  3. The next step is to open the Marketing 360® Mobile App and select Settings.

  4. In the setting options, click on Card Readers.

    Screen_Shot_2022-08-02_at_12.04.20_PM.png

  5. You will see prompts to allow the app Location and Bluetooth access. You must allow the app access to these in order to connect a card reader.
    Screen_Shot_2022-08-02_at_12.05.53_PM.png
  6. Then, select Connect a Reader.

    Screen_Shot_2022-08-02_at_2.07.59_PM.png

  7. Your device will search for an available credit card reader. Make sure your mobile device has bluetooth enabled.

    Tip: For optimal connectivity, make sure your mobile device is fully charged, as low battery can affect connectivity.

    Screen_Shot_2022-08-02_at_2.09.04_PM.png

  8. Once the reader is found, your app will show you are connecting to it.

    Screen_Shot_2022-08-02_at_2.12.38_PM.png

  9. The app will show your connected card reader like the image below. Tap on the reader image to finalize the setup.

    Screen_Shot_2022-08-02_at_2.11.29_PM.png

  10. The reader fully connected when light on the far right blinks to show a ready state. You are now ready to process transactions!

    Screen_Shot_2022-08-02_at_2.13.36_PM.png