Posts Slider module

In the Posts Slider module, a set of posts or pages is displayed with either a sliding or a fade-in animation. The featured image of each post becomes the background image in the slide (unless you select the option to hide it), with post info and content overlaid on the slide. See examples of Posts Slider layouts in the Related Articles.

Note: Some features are distributed across more than one tab. For example, you can set the featured image to display as a thumbnail instead of a background on the Layout tab. On the Style tab, you can then set the post title, post info, and excerpt to appear to the left or right of the thumbnail.

Slider tab

Section Field Description
Height Minimum height of the posts slider. The height will expand to fit the photo being displayed.
Tip: If you don't like the expanding and shrinking to accommodate various photo heights, preprocess your photos so they are all the same height.
Auto play If Yes, the display moves through the posts automatically, unless the user intervenes by clicking on the dots or arrows or moving the cursor over one of the posts. If No, there is no animation and user must use the navigational aids.
Delay Number of seconds each post is displayed. This setting is used only if Auto play is enabled.
Loop If Yes, the list of posts is displayed in a repeating continuous carousel. If No, the list of posts ends when the last post is reached. This behavior occurs whether autoplay is enabled or not.
Transition Choose the type of animation for the transition to the next post: Fade or Slide.
Transition speed When autoplay is enabled, the speed in seconds at which one slide moves to the next when the Delay time has finished.
Number of posts Maximum number of posts to display. Which posts are selected depends on the filters set on the Content tab.
Slider controls Show dots If Yes, a set of horizontal dots is displayed at the bottom of the carousel. The number of dots equals the Number of posts value, and one dot is highlighted to indicate which post in the sequence is being displayed. Visitors can manually change the display by clicking one of the dots.
Show arrows If Yes, a left and right arrow is displayed on either side of the post list so user can move ahead or back manually. You can style the arrow color, background color, and background shape on the Style tab.

Layout tab

Section Field Description
Show featured image? Choose Show to display the post featured image. Choose Hide to show only text with a solid color background.
Featured image (appears when featured image is set to Show) Image Display image as the slide background or as a thumbnail. Thumbnail displays the post title and post info to the left and the featured image thumbnail to the right in each slide.

Size Which size image from the WordPress Media Library to use.
Note: The image will always be sized to fit the post max width, so this setting affects image resolution rather than the actual size of the image on the page. This setting doesn't change the amount of crop. Increasing mage size increases the size of the file loaded, which can affect page load time.
Crop (Appears when Image is set to Thumbnail)
Crops the featured image to a particular shape. Note that this may cut out some parts of the image.
Post info Author Show or hide the post author.
Date Show or hide the post date.
Date format (Appears when Date is set to Show)
Select Default to use the WordPress date format specified in Settings > General or override the default with a specific date format.

Comments Show or hide the number of comments.
Content Show or hide post content. If set to Yes, the entire post excerpt is displayed, if the post has content in the Excerpt field. If there's no excerpt, the WordPress default of the first 55 words of the post content is displayed, with an ellipsis of three dots at the end to show there is more content.
More link Show or hide the Read more link after the post content. If set to Show, you can also customize the default Read more text.
More link text Customize the default Read more text.

Style tab

Section Field Description
Heading Heading tag Choose the level of heading that will be assigned to the post title when it is rendered.
Heading size Choose Default or Custom. If you choose Custom, you can specify the custom font size.
Text Position If Image on the Layout tab is set to Background, this setting determines which part of the slide the post text appears in: Left, Right, or Bottom. If Image is set to Thumbnail, this setting determines the orientation of post text in relation to the thumbnail: post text on the left or post text on the right.
Text width (Applies only when Position is set to Left or Right)
You can choose the percent of the width of the slide that the post content covers.
Text padding Sets the amount of space on all four sides of the post text.
Colors Text color Color of any unlinked text in the post title, post info, and post content.
Link color Color of any linked text, including the post title, author, number of comments, and the Read More link.
Link hover color Color of the link when the cursor hovers over it.

Text background color Color of the text background.
Text background opacity (Applies only when the featured image is set to Background)
Opacity of the text background color.
Text background gradient (Applies only when the featured image is set to Background)
If set to Yes, automatically adds an opacity gradient to the specified text background color. The gradient uses the text background color and the text background opacity at the left edge (for text on the left) or right edge (for text on the right) and decreases in opacity towards the center of the slide. See examples in the Related Article below.
Text background height (Applies only when the featured image is set to Background)
If set to Auto, the text background color adjusts to fit the area of text shown on the slide plus the Text padding specified in the Text section.
If set to 100%, the text background color covers the entire height of the slide. (The text background width is the width of the text plus padding.) See examples in the Related Article below.
Note: When Position in the Text section on the Style tab is set to Bottom, the text background effect will always be the equivalent of the Auto setting, even when set to 100%.
Nav arrows
(Only when Show arrows is set to Yes on the Slider tab)
Arrows background color Sets the color of a circle or square background behind the navigation arrows. When no color is set, there is no background circle or square.
Arrows background style When Arrows background color is set, this option sets the arrow background to a circle or a square.
Arrows color Sets the color of the arrows themselves.

Content tab

Section Field Description
Source Main query or custom query. The default for a standard Woo360 layout is Custom query, which enables all the other fields on this tab.
In Woo360 Themer, the default is Main query, because normally for a Themer layout you want the query for posts to be based on whatever archive page the query is created for.
Custom query Post type Choose pages, posts, or a custom post type, such as WooCommerce Products or a custom post type that you create yourself.
Order Descending or ascending, and whether it is by date, numerical, or alphabetical depends on the Order by setting.
Order by The choices are Author, Comment count, Date, Date last modified, ID, Menu order, Meta value (alphabetic or numeric), Random, Title.
If you display pages in Menu order, you are effectively displaying a menu, with the added ability to display a content summary of the page.
The Meta value option enables ordering by a custom field. If you select either the alphabetic or numeric Meta value option, a Meta key field appears so you can enter the key (meta_key).
Offset Enter an integer if you want to skip a certain number of posts in the order specified in the Order setting.
Exclude current post Excludes the current post from the query. This is useful when you are using the module to create a list of related posts on a single post page.
Filter Posts, Pages, Products, etc. (The label matches the single post name for the Post type you set)
Include or exclude a set of posts, page, products, etc., by title. Start typing a word, and the titles containing that word will be displayed for you to choose. Keep selecting titles until you have the set you want to include or exclude.
Categories (Hidden when the Post type setting is Pages)
You can include or exclude categories to display.
The third setting, Match related categories except, is useful in Singular-type Themer layouts when you want to use the Posts module to display a list of related posts, and you want to display the related posts in a family of categories except for the specific categories that you name.
Tags (Hidden when the Post type setting is Pages)
You can include or exclude tags to display. The choices are the same as for including or excluding categories.
Authors You can include or exclude posts or pages by specific authors.